How to solve the problem that the counterbalance forklift cannot start？

When we use a counterbalance forklift, do we encounter such a thing that the counterbalance forklift cannot start? The sales of electric forklift suppliers feel that such a thing is very frustrating just to think about it. An important part of the counterbalance forklift material handling business or supply project has played a very important role in the operation process. However, we will inevitably encounter the situation that the counterbalance forklift engine cannot be started during use, and there are many reasons. For novices, preventing such incidents is especially important. So, let's find out how to solve the problem that the counterbalance forklift cannot start.

Observe whether there is an alarm code on the instrument display before driving. Counterbalance forklift are similar to motor vehicles in that any warning light is not a good sign. If the counterbalance forklift fails to start and a warning code is displayed, we must perform a diagnostic test. Starting from this, the sales suggestion of the electric forklift suppliers recommends to find a mechanic to determine the cause of the failure, and then evaluate the maintenance situation to speed up the maintenance process by determining the root cause, thereby saving time and money.

Check if the battery is normal. We usually find that battery drain is the root cause of most equipment failures. The trouble caused by a battery failure can be very inconvenient for the driver, and in some cases can cause many problems when the vehicle is properly charged or the power is turned on. In order to ensure that the truck can get enough power, the electric forklift suppliers sells to check the battery before each use and to ensure that all electrical components are turned off at the end of the shift. This will ensure that the engine has the required ejection volume and that it will be plugged in after the equipment is used.

Consider weather. For traditional forklifts, the sales of electric forklift suppliers believe that cold weather is very troublesome. Many handling equipment need to properly warm up the engine before use to ensure that the counterbalance forklift will lubricate the entire system when it generates sufficient heat. Failure to do so will prevent the counterbalance forklift from starting or stalling when idle.

Press the emergency shutdown button. Sometimes pressing the emergency power off button can solve the problem that the counterbalance forklift engine cannot start. Because these buttons cover the ignition block, make sure that the button is turned off before powering on, otherwise the counterbalance forklift will fail to start and cause a series of problems.

The above is the relevant content brought about by the electric forklift suppliers's sales to solve the problem that the counterbalance forklift cannot be started. If you have other questions about the storage handling equipment, please call!