CPD30 3t Lithium Battery Counterbalanced Forklift Truck User Guide
.
Scope of application and use environment
1.2 Main Uses
Handling and stacking palletized goods: Forklifts are mainly used to move goods placed on pallets and stack them at a certain height.
Handling non-palletized goods: Equipped with the right attachments, it can be used to move and stack goods that are not placed on pallets.
It is forbidden to use forklifts for other purposes such as traction and carrying people.
1.3 Working Environment
1.3.1 Ground conditions
Lithium battery counterbalanced forklifts should work in a flat, firm road or ground with good ventilation.
The performance of lithium battery counterbalanced forklifts is affected by ground conditions, and the driving speed needs to be adjusted according to the actual situation.
When driving on slopes or rough roads, you should take extra care to ensure that you can stop in time.
1.3.2 Climatic conditions
Ice and snow roads: Snow chains should be installed before driving, and sharp acceleration, sudden stops, and sharp turns should be avoided.
WARNING: After installing the snow chain, the grip is enhanced, but the unilateral slip anti-slip performance is reduced, attention should be taken.
Windy weather: Outdoor work in windy weather should be avoided as much as possible, as high winds can affect the driver's vision and may cause unstable loading.
Cold season: Lithium battery counterbalanced forklifts should pay attention to the charging temperature, the normal charging temperature range of the battery is 5-40°, do not use it in an environment beyond the normal charging temperature range.
Be sure to follow these safety guidelines to ensure safe operation and extend the life of your equipment.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
