Electric forklift practical test project
Precautions for site testing:
1. Getting Started
(1) Before departure, check the instrument of the electric forklift, wear work clothes, a safety helmet, and do not wear slippers, high heels and other shoes that do not meet the requirements;
(2) Check whether the shift lever is in neutral and whether the manual lever (handbrake) is in the braking position.
2. Forward
(1) Do not stop during driving;
(2) It is not allowed to press the line, rub the pile, go out of the line, or collapse the pile during driving.
3. Reversing
(1) Reversing smoothly without stopping;
(2) When reversing, it is not allowed to press the line or pile, or press the line or move the pile.
4. Homework
(1) When the forks of the electric forklift move in and out of the stack, the stack should not move more than 0.2m;
(2) Do not counterattack when stacking and unstacking (that is, when the fork is inserted into the stacking object, the position is wrong, and then re-insert the yard truck after reversing;
(3) When picking up the fork, do not hit or push the container. When the fork is lifted, the fork is completely inserted into the stack, and the center of gravity of the goods is stable;
(5) Do not show up, fall, move stacks, or dump containers while driving;
(6) Put the stacked items in place.
5. Parking
(1) Do not press the line when parking, reset the operating lever, tighten the handbrake, and steadily land the fork;
(2) The front end of the vehicle is more than 0.5m away from the parking line after parking, and shall not exceed the parking line.
Precautions for venue roads:
1. Getting Started
(1) Before starting the electric forklift, check the status of the forklift;
(2) After getting on the vehicle, fasten the seat belt, adjust the mast to tilt backward, and adjust the fork to be 0.2~0.3m off the ground.
2. Shift
(1) Shift specification and clutch usage specification;
(2) Specification for the use of direction lights;
(3) Standards for the use of service brakes;
(4) The engine does not stall when driving.
3. Electric forklift turning at right angles
(1) When turning at right angles, turn on the turn signal. After turning, turn off the turn signal.
4. Stop at a fixed point on a slope
(1) There is no flameout or pause during lifting.
5. Turn and U-turn
(1) Don't turn the steering wheel in a hurry when turning or turning your head;
(2) After turning around, no part of the forklift can touch the wire.
6. Parking
(1) Do not press the line when parking, reset the operating lever, tighten the handbrake, and steadily land the fork;
(2) The front end of the electric forklift is more than 0.5m away from the parking line after parking, and shall not exceed the parking line.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
