What are the precautions for using forks of electric forklifts?
Fork belongs to the working device of electric forklift, which is very important for electric forklift. It can change the width, adapt to different goods or pallets, and help them to lift, lower, transport and put them in the specified position. Once there is a problem with the fork, the whole electric forklift can no longer operate normally. Therefore, the driver must operate it in a standard way and always check whether the fork can operate normally. So, what are the precautions when using the fork of the electric forklift? The electric forklift manufacturer has something to say.
If cracks are found on the surface of the forks of the electric forklift, especially at the root, upper hook, lower hook and vertical section joints of the forks, stop using the forks. If it is found that the height difference between two fork tips exceeds 3% of the length of the horizontal section, stop working and repair or replace the fork. The electric forklift manufacturer told us, in normal work, it is necessary to ensure that the locating pin can operate normally in its original position. Once any fault is found, it cannot be operated again until it is repaired.
The driver should regularly check the wear of the horizontal and vertical sections of the fork of the electric forklift, especially the root of the fork. If it is detected that the thickness of the fork has decreased to 90% of the original, the operation can no longer be carried out. If the upper hook bearing surface of the fork and the locating surface of the upper and lower hooks are worn, overstocked and partially deformed, resulting in an increase in the gap between the fork and the fork frame, it needs to be repaired in time. If the fork is damaged and cannot be repaired temporarily, it must not be used forcibly. The forks cannot be put into use immediately after welding and repair. They should be inspected by strict technical standards to see if they meet the specifications of the electric forklift manufacturer before operation.
The above are the precautions for using forks of electric forklift. I believe you can see that forks also need careful maintenance, and once problems occur, they will bring a lot of trouble. The electric forklift manufacturer told us, if the fork is found to have problems, it can not be used. You must stop the operation immediately and repair it as soon as possible. The electric forklift manufacturer is equipped with perfect after-sales service, which can help customers to solve these problems easily.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
