What should be paid attention to when using the battery of electric forklifts?
Electric forklift is a very popular forklift. It is environmentally friendly, quiet, manpower saving, efficient, easy to maintain, and favored by enterprises. On a electric forklift, the battery is a very important part. A battery which has well functioning can improve work quality and ensure driver safety. It has a longer service life and can save costs. So, how can we keep the battery in good condition? The forklift manufacturer told us that no matter what the forklift price is, the following problems should be paid attention to in order to maintain the battery of the electric forklift.
First of all, pay attention to shockproof when disassembling, assembling and handling the storage battery of the electric forklift, and install the storage battery firmly and stably. The electrolyte injected shall be pure, and no dust shall enter the battery. The surface of the battery shall be wiped frequently to keep it clean and free of dirt. Keep the vent hole of liquid filler plug unblocked. In addition, timely remove the corrosion on the wire connector and pole, fasten the connector and apply the protective agent. Regularly check the electrolyte density and liquid level, and regularly check the discharge degree of the battery. The forklift manufacturer reminds that no matter what the forklift price is, if the discharge exceeds 50% in summer and 25% in winter, it should be charged as soon as possible.
So, how do we check whether the battery of the electric forklift is in good condition? First, we need to look at the liquid level. The liquid level can be measured with a glass tube, and the electrolyte should be 10~15mm higher than the electrode plate. If the battery is a plastic shell battery, it is generally marked with the lowest and highest marking lines to directly see whether the liquid level meets the requirements. When electrolyte is insufficient, distilled water must be replenished in time. Secondly, we need to see the degree of discharge. Use a densitometer to check the discharge degree. First, discharge the air in the densitometer bag, then insert a straw into the liquid adding hole, inhale the electrolyte, and float the float. The scale on the float is the density value. The forklift manufacturer reminds that no matter what the forklift price is, the temperature of electrolyte should also be measured during the test. It is corrected to the standard density of 25 ° C, and the discharge degree of the battery is calculated according to the formula.
The above is to determine whether the battery of the electric forklift is in good condition and the precautions when using the battery. The battery needs our careful maintenance to extend its life and keep it in the best working condition. The forklift manufacturer reminds that we should always observe the state of the battery, and solve the problems in a timely manner.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
