Why are the tyres of the electric forklift seriously worn?
As you all know, tires are an important part of the electric forklift. The tires with good quality can make the electric forklift run fast and smoothly, providing guarantee for the safe and efficient operation of the electric forklift. However, the tyres of the electric forklift have a service life, and the specific length of time should be determined according to the wear degree of the tyres of the forklift. If the driver does not care about the wear of the tires of the electric forklift, it may cause a tire blowout and affect the normal operation. So why are the tyres of the forklift for sale seriously worn? The electric forklift manufacturer will tell you about it.
The serious wear of the tyres of the electric forklift is mostly related to the road conditions. The road conditions will affect the friction between the tire and the ground and the load that the tire can bear. If the working conditions of the forklift are relatively complex, the life of the tire may be greatly shortened. Secondly, the load and tire pressure will affect the degree of tire wear. Under a certain load and tire pressure, with the increase of vehicle speed, the deformation frequency of the tire, the vibration intensity of the tire body, and the twisting deformation around and at the side of the tire will also increase. The heat generated by friction per unit time will increase, and the working performance of the tire of the electric forklift for sale will deteriorate. The electric forklift manufacturer told us that this may lead to ply breakage and tread spalling, and increase tire wear.
The corrosion of grease and acid substances will lead to serious wear of the electric forklift. When the tire is corroded by grease and acid, the physical and chemical properties of the tire will change, and the bearing capacity will be greatly reduced. If combined with the impact of high temperature, the tire will be seriously damaged, which is easy to cause a tire blowout. Moreover, the tyres corroded by grease and acid substances will have blocky peeling of the sealing layer, rubber peeling off at the tyre mouth and separation of the tyre cord and rubber of forklift for sale. The electric forklift manufacturer reminded that the patch could not fit with the oily rubber, so even if the tire damage was small, it was unlikely to be repaired.
When using a electric forklift, always pay attention to the tire wear. If serious wear is observed, stop using immediately, find out the cause and repair in time. After using the electric forklift, pay attention to the regular maintenance of tires, which can prolong the life of tires. The electric forklift manufacturer told the forklift operator that the tire is very important for the electric forklift. Maintaining tyres and extending the service life of tyres can save the use cost of electric forklift for sale and improve the work efficiency and quality.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
