electric forklift manufacturers sales talk about forklift lubricants

Now electric forklift manufacturers sell small electric forklift for more and more applications, some storage companies, factories, large warehouses and so on. But no matter what type of small electric forklift, friction during use is inevitable, and the use of lubricating oil is also essential. Use lubricating oil to reduce wear, cool down, clean, remove rust and absorb vibration of moving parts to ensure the normal operation of the forklift.

So how do we add small electric forklift oil? What kind of lubricating oil should I add? The sales of electric forklift manufacturers come to chat with you about common knowledge. In fact, there are quite a few places where the forklift needs to be lubricated. First, the tie rod joint of the rear wheel steering axle and the claw shaft joint of the two wheels, because these positions are the places where there is a lot of movement in the equipment, so these places will often need to be lubricated. Oil. The mast in front of the small electric forklift also needs attention. There are two back-pulling oil cylinders on the mast, and the two front support frames have a movable shaft. These parts also need to be lubricated.

The connection between the gantry and the bridge cannot be ignored. The inner rail of the gantry can be added frequently, but electric forklift manufacturers remind everyone that it is not advisable to add more, and a little oily feeling is enough. A little oil or diesel oil should be added to the chain, mainly to prevent rust, and the rest of the chain should be added as appropriate according to the actual situation.

What if it is a new small electric forklift or if the small electric forklift has not been used for a long time? The sales of electric forklift manufacturers should tell everyone that within two weeks of starting to use, add lubricating oil to the bearing, and use new oil to squeeze out all the old oil while adding oil and lubricate, and add it more than twice.

At the same time, electric forklift manufacturers also remind everyone to pay attention to the following points. Before adding lubrication to the small electric forklift, clean the dirt on the oil cap, oil plug and oil nipple to prevent the dirt from falling into the mechanism. When injecting the lubricant with a grease gun, inject it until the lubricant is squeezed out from the joints of the parts. Then there is the seasonal lubricant or oil should be changed in summer or winter.