How to spend the running-in period of electric forklift price
The price of the newly bought electric forklift may not be very smooth, many functions may be a little unskilled in operation, and it takes a period of man-machine running-in. Electric forklift manufacturers china sales want to tell everyone that the new car should not carry heavy goods in the early stage of running-in. Next, let's talk to you about what to do in the first 100 hours of the initial stage of the new car's running-in, and how to maintain the new forklift.
First, carefully check whether there are any problems with the electric forklift price equipment. If any problems are found, carry out pre-inspection and maintenance in time as required. The oil change and lubrication should be earlier than the prescribed time. If the condition is normal, the forklift must be warmed up before driving, no matter what the season. Electric forklift manufacturers china reminds you to avoid emergency braking and emergency steering during driving. It is recommended that you start slowly when selling 1 ton electric forklifts. Do not run the engine at high speed under no-load conditions.
Electric forklift price safe driving, the responsibility is greater than the sky! In order to reduce the occurrence of more safety accidents of electric forklifts, the sales of 1 ton electric forklifts hope that the majority of electric forklift drivers should remember not to drive the forklift under the following conditions:
People have not yet sat down firmly and will not start;
Resolutely do not start the safety equipment in poor condition;
The car door is not closed and will not start;
If the seat belt is not fastened, do not start firmly;
Electric forklift manufacturers china stipulates that the goods shall not be started unless the goods are loaded;
The pedals or fork stations are not resolutely not started;
People at the frame station do not resolutely do not start;
The equipment is over-long, over-high, and over-loaded and will not start;
Resolutely do not start the succession without inspection.
If the electric forklift price is not used for a long time, the sales suggestion of 1 ton electric forklift is to lubricate the bearings once within two weeks of starting use. When adding lubricating oil, pay attention to using new oil to squeeze out all the old oil and lubricate it more than twice. Remember to clean the dirt on the oil cap, oil plug and nozzle before lubricating the bearing to prevent dirt from falling into the forklift structure.
One more point, electric forklift manufacturers china believes that it needs to be reminded. When injecting lubricant with a grease gun, inject it into the joints of each component until the lubricant is squeezed out. Replace seasonal lubricants or engine oils in summer or winter, and the performance of all parts of the electric forklift after lubrication can be optimized, thereby improving work efficiency!
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
