What are the common faults of the electric scissor lift table?

Electric scissor lift table is a kind of mechanical equipment used for lifting workers and goods. It is stable, safe, flexible, easy to operate, and very commonly used. However, it will inevitably encounter failures in the process of use, which will affect the work efficiency. If these faults cannot be handled in time, the life of the electric scissor lift table may be shortened or seriously damaged eventually. Next, the lift table manufacturer will tell you about the common faults of the electric scissor lift table and the countermeasures.

As the name implies, the electric scissor lift table is a device driven by electricity. Therefore, the lifting and other operations of the entire lift table are controlled by buttons. If the button is insensitive or unresponsive during operation, it must be handled in time. This problem may be caused by the short circuit and electrical system fault of the electric scissor lift table. The lift table manufacturer reminds that careful inspection should be carried out in time to avoid affecting the work.

The second common problem is that the electric scissor lift table fails to descend to the natural height. There are several reasons for this problem. First of all, the main frame of the electric scissor lift table was deformed, which prevented it from descending smoothly. Secondly, it is possible that too much hydraulic oil is injected into the lift table. Finally, the lift table manufacturer told us that there may be foreign matters between the scissors bars of the lift table.

The third common problem is that the motor of the electric scissor lift table is noisy, and the motor is hot and emits peculiar smell. There are several reasons for such problems: the electric scissor lift table is overloaded; the voltage of electric scissor lift table is unstable; the motor coil is burnt or the seal is poor. At this time, the lift table manufacturer told us that we should check one by one. The measures that can be taken are unloading, checking the circuit for problems, tightening the seal, and replacing the coil.

It is normal for the electric scissor lift table to have some minor faults. Don't worry too much, nor underestimate these problems. Timely inspection and handling can avoid major faults and make the electric scissor lift table run stably for a long time. Not only that, but also normal maintenance is very important. The lift table manufacturer recommends that us not be bothered, and carry out regular maintenance. Many problems can be found and solved in advance before they occur, which can make twice the result with half the effort.