The reason why the electric stacker lift can not rise and the solution !
The electric stacker lift is easy to operate and powerful, and it uses electric drive walking and electro-hydraulic lifting. Therefore, many times the stand up forklift fork does not rise! So today, the NEW NEWON Forklift will analyze the reasons and solutions for the electric stacker lift.
Analysis of the reasons why the stand up forklift can not rise:
1. Electric stacker lift lacks hydraulic oil
2. Stand up forklift line fault or other related electrical component failures such as: contactor, motor, fuel gauge, lift button
4. The filter of the electric stacker lift is dirty or the pipeline is dirty and the hydraulic system is blocked.
5. Each valve core fault on the inner valve block of the stand up forklift, such as solenoid valve, overflow valve
6. There is interference between the electric stacker lift overload or the frame gantry carriage.
7. Stand up forklift cylinders leak or wear oil leakage
8. The battery capacity of the electric stacker lift is insufficient, and the under-voltage protector
Stand up forklift fault handling method:
1. Add hydraulic oil to the electric stacker lift
2. Replace the electrical components of the stand up forklift
3. Replace the gear pump of the electric stacker lift
4. Clean the stand up forklift filter and pipeline replacement hydraulic oil
5. Check the valve center of the electric stacker lift , repair or replace
6. Unload or interfere with the stand up forklift
7. Repair electric stacker lift cylinder or replacement cylinder
8. Battery charging for stand up forklift
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
