forklift manufacturers in china: what to pay attention to when charging
Can a small electric forklift be charged for a long time? I believe this is a question of many users. What forklift manufacturers in china want to tell everyone is that small electric forklift chargers should choose smart chargers. When the battery is fully charged, the charger will automatically power off, so there will be no long-term charging problems, and no explosion problems. . In the use of the battery, we recommend using a special brand charger for charging, and no flammable and explosive materials should be placed around it, so that there will be no problems even if it is charged at night.
Let’s take a look at the steps of charging by forklift manufacturers in china:
1. After parking to the charging area, turn off the red emergency stop switch and key switch, and open the battery box cover;
2. When charging, make sure that the heat dissipation of the device is unobstructed, and then check whether the electrolyte is in normal condition. If the red buoy is 1cm away from the white part, it is normal. If it is not enough, add distilled water in time.
3. Unplug the connector that connects to the battery and the connector that connects to the motor.
4. Connect the battery connector to the charger connector.
Small electric forklift batteries are mostly lead-acid batteries, which require about 8 hours to fully charge, and can be operated at full load for about 4-5 hours after being fully charged. Forklift manufacturers in China remind everyone that each battery discharge cannot exceed 80% of the battery's rated capacity, and the battery must be charged immediately after the discharge is completed. Remember to check the electrolyte level and adjust the specific gravity with deionized or distilled water in time.
If you want to extend the life of the battery, maintenance is essential. Check once a week whether the battery connection wires and lead wires are loose or damaged. If problems occur, adjust and replace them in time. Check the battery voltage, electrolyte density, liquid level and temperature at least once a week. If you find any accumulated water in the battery box, it must be soaked up immediately. Before the end of charging, we need to record the voltage, electrolyte density and temperature of all single cells. If it is found that the measurement data is different, forklift manufacturers in china suggest to ask professionals to deal with it in time.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
