How to properly use and maintain the battery of a semi electric stacker?
The semi electric stacker is a manual push-pull walking, which can be raised and lowered electrically. small electric forklifts are suitable for short-distance transportation in factories, warehouses, logistics and other enterprises and loading and unloading in areas with low workload. The maintenance of the semi electric stacker is relatively simple. The maintenance of the key components of the battery is the top priority. How to charge the battery of a semi electric stacker? We understand from the following points.
1. The charging environment of the small hydraulic lift is clean and ventilated. If possible, the battery can be removed or the cover of the semi electric stacker can be opened;
2. The electrolyte level of the semi electric stacker should be 15mm higher than the separator, and the electrolyte should be replenished in time below this mark to prevent the battery from losing power and affecting the life of the light battery-the semi electric stacker. In addition, the temperature of the electrolyte should not be higher than 45 degrees during charging;
3. Do not expose the semi electric stacker to an open flame when charging, because the battery will produce a large amount of combustible gas during the charging process, so prevent the small electric forklift from catching fire during the charging process. Charging process
4. The semi electric stacker should avoid skin and acid contact during charging. If there is contact, please use a lot of soapy water or consult a doctor;
5. The battery should be kept clean and dry at ordinary times, and it is not allowed to place other items on the battery of the small hydraulic lift;
6. Waste batteries of semi electric stackers should be disposed of in accordance with the National Environmental Protection Law.
semi electric stackers generally can carry 2 tons, and the load will drop along the load curve after more than 2 meters. After lifting by 2 meters, it can carry 1-1.3 tons, and when it is raised to 3 meters, it can carry only 800 kg. This is related to the load curve. The higher the height, the lower the load. More than 2 meters will appear "lost load" phenomenon.
The load curve change chart produced by the semi electric stacker forklift manufacturer must strictly follow this curve when stacking goods. Don't get lucky: it may, maybe nothing will happen! If it happens, then the injury will be fatal. Therefore, the purchase of a semi electric stacker must be determined according to the actual usage! Then choose products that meet safety standards and have reliable after-sales service.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
