How to safely use the hydraulic forklift battery?
As an forklift manufacturers driver, be sure to follow the correct operating rules for hydraulic forklift, safe use, keep in mind the following basic ten points:
1. The forklift manufacturers battery will generate hydrogen gas, which may cause an explosion. It is strictly forbidden to smoke near the battery of the hydraulic forklift. Any flame or spark is strictly prohibited. Forklift manufacturers batteries must be well ventilated when storing or charging, but do not be at the air outlet to avoid acid mist causing corrosion of the hydraulic forklift battery.
2. Forklift manufacturers battery liquid contains corrosive liquid, which may cause serious burns, avoid contact with skin, eyes or clothes. If an accident occurs, please rinse with plenty of water immediately and seek medical attention.
3. When inspecting or servicing the hydraulic forklift battery, use rubber gloves to avoid electric shock.
4. The surface or joint of the forklift manufacturers battery must be kept clean. Dust and impurities on the hydraulic forklift must be cleaned with a damp cloth, otherwise it will leak electricity or even cause a fire.
5. When cleaning the forklift manufacturers battery, be sure to use a damp cloth, not a dry cloth.
6. Do not connect tools between the positive and negative poles of the hydraulic forklift battery.
7. When the battery of the forklift manufacturers is charged, the temperature of the electrolyte should not exceed 50 degrees Celsius to avoid damage caused by electrolyte overflow, and pay special attention during the summer day.
8. Before pulling the battery plug of the hydraulic forklift, in order to avoid sparks, be sure to turn off the switch of the forklift manufacturers and the switch of the charger.
9. The electrolyte surface of the hydraulic forklift battery should not be lower than the minimum limit, otherwise the forklift manufacturers battery is easy to heat and easy to burn.
10. Children should not be near an hydraulic forklift.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
