Do you know the advantages and disadvantages of the fork-legged jack stacker?

The fork-legged automatic stacker price economy can effectively reduce the weight of the jack stacker fuselage, because if the automatic stacker price adopts a legless design, if it needs to achieve the load capacity of the cargo with a load capacity of 1.5 tons, then the jack stacker The weight of the completed vehicle needs at least 1.5T to upgrade the corresponding cargo; but the economic design of the fork-legged automatic stacker price compensates for the shortcomings of this lever principle, cleverly pulling the fulcrum forward through the support leg Stretched a longer distance.

Advantages of the fork-legged jack stacker:

1. It can improve the stability of the economical fuselage of the automatic stacker price. On the professional side, it increases the wheelbase of the front and rear wheels of the jack stacker, making the automatic stacker price economical vehicle safer and more stable when moving forward and backward. .

2, can effectively reduce the weight of the jack stacker; because if the automatic stacker price economy is legless design, then the jack stacker must use the principle of leverage, if you need to reach the load of 1.5 tons of rated size, then electric The weight of the automatic stacker price must be at least 1.5T to raise the corresponding cargo; but the fork design compensates for the shortcomings of the jack stacker, cleverly extends the advancement distance through the support legs, the economic load capacity of the automatic stacker price and the body itself. The weight can easily exceed the 1:1 ratio. It can be seen that the economical design of the fork-legged jack stacker makes the traditional lever principle very good.

3, the fork-legged automatic stacker price economy can effectively shorten the size of the jack stacker, making the automatic stacker price compact and exquisite! Since the jack stacker is economical with support legs and the fulcrum moves forward, the rear part only needs to follow some of the equipment required for the automatic stacker price without adding extra weight, so the fork-legged jack stacker is economical. Can effectively reduce the length of the body.

Disadvantages of the cross-legged automatic stacker price:

1.Fork-legged jack stacker has limited economic use: it is not suitable for high slope environments. Usually, the slope cannot exceed 7°, otherwise there is a danger of the chassis stranding. The fork-legged automatic stacker price economy is not suitable for shelves and stacking sites where the bottom cannot enter the front fork.

2.Fork-legged jack stacker economical requirements for the use of pallets: pallets can be roughly divided into single-sided and double-sided types; single-sided pallets are used to release goods, and under the panel are support columns or supporting documents and then the ground. Single-sided trays can also be referred to as single-layer trays. Double-sided trays are also known as double-layer trays. On the basis of a single-sided tray, there is a panel under the support column, and then the panel is grounded. That is, the double-sided tray has two layers of panels and can be flipped multiple times. However, single-sided trays can only be used with the panel facing up.

The fork-legged automatic stacker price can only be used on single-sided pallets because the jack stacker support legs and forks are synchronized into the gap of the pallet, and then the fork of the automatic stacker price lifts the pallet, while the forks are all The economic support foot of the jack stacker is complete where the weight of the automatic stacker price and cargo is supported! Therefore, if used with a double-sided tray, it will result in two undesirable results: 1. The fork of the jack stacker cannot enter the gap of the tray. 2. The fork of the automatic stacker price can enter the pallet space synchronously with the support legs, but the fork-legged jack stacker is economically upgraded. The upper fork of the tray is lifted and the support legs are still pressed against the lower plate, causing damage to the tray or damage or integrity of the automatic stacker price!

3, the tray height has certain requirements. In general, when the fork of the fork-legged jack stacker is placed at the lowest point (ie the fork is placed directly on the support leg), the minimum height is generally 85mm or 90mm; then the pallet clearance height must exceed the minimum of the electric forklift fork height.

Compared with the economics of the fork-legged automatic stacker price, the legless counterweight jack stacker has many advantages and disadvantages:

Advantages of the legless counterweight automatic stacker price: It has a wide range of applications, and the slope is higher than that of the  jack stacker with fork legs. The minimum point of the fork can reach 50mm or even lower, and the single-sided tray can be easily used. Easily adapt to any stacking needs.

Disadvantages of the legless counterweight automatic stacker price: the use of the counterweight makes the jack stacker more cumbersome, the automatic stacker price body is longer and inconvenient to enter a narrower space, the use is not very convenient, the weight and size are not convenient Enter the elevator, the price is more expensive.