Maintenance of electric forklift charger
Maintenance of electric forklift charger
1. Please wipe the electric forklift charger with a dry cloth or anti-static cloth to keep it clean
2. The charger must prevent strong impact or exposure to high temperature and humidity
3. It is forbidden to charge non-rechargeable batteries
4. It is forbidden to disassemble the charger without authorization
5. The charger should be placed vertically and placed in a dry and ventilated environment to avoid moisture and keep away from flammable and explosive materials
6. After the electric forklift battery is fully charged, disconnect the input AC power first, and then disconnect the charger from the battery
7. Do not cover the charger when charging, and the ambient temperature should not exceed 40℃
8. Do not use chemical or abrasive cleaning agents, so as not to damage the shell
9. This charger is for indoor use only, beware of rain
10. It is forbidden to charge non-rechargeable batteries
11. The AC power supply must be disconnected when no one is in use or the AC power supply is not used for a long time
12. The interval between two starts is not less than 10 seconds (cut off the input power)
Precautions for the use of electric forklift chargers
1. The battery polarity cannot be reversed, otherwise the smart charger and battery will be damaged. The smart charger should be installed in a special place with good ventilation, dryness, no serious dust, no corrosive gas, and no strong electromagnetic field interference. The cabinet should be grounded reliably (there is a grounding bolt at the bottom of the back of the cabinet).
2. The smart charger is suitable for indoor and outdoor use, and cannot enter the machine without water.
3. The input power of the smart charger is two-phase 380V±5%, 50HZ, and the input line cross-section is not less than 62.
4. The output line should be selected according to the distance, and the total voltage drop of the line should not exceed 5%.
5. The smart charger is suitable for ambient temperature of -10℃～50℃ and altitude below 1000 meters. When the machine is in use, the distance from the surrounding walls that affect its ventilation and heat dissipation should be greater than 0.6 meters. Regularly check whether the fan is operating normally.
6. When charging the electric forklift, plug in the battery plug first, and then turn on the power. After charging is complete, first cut off the power supply and unplug the battery.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
