Manual stacker use skills, so that you can do more with less
Guide to the use and maintenance of manual stackers
Seal replacement
When the seal is replaced, air may enter the hydraulic system, so the lever needs to be placed in the lowest position and then the handle is repeatedly swung a dozen times to expel the air.
Lubricate moving parts with hydraulic or lubricating oil to reduce wear
Daily inspection and maintenance
Inspect manual stackers regularly to minimize wear and tear.
Particular attention is paid to inspecting the wheels, axles, forks, lifting and lowering handling sections.
After each job, the forks should be left unloaded and lowered to the lowest position.
Operational precautions
Since battery damage can have a significant impact on the vehicle, the operator must familiarize himself with the condition of the vehicle before using it.
It is forbidden to allow unsupervised personnel to operate the vehicle at will.
The vehicle cannot accelerate for a long time.
Before starting, you should slow down for a few seconds before accelerating.
When driving, do not mistake the Forward and Backward directional buttons for the steering buttons.
Safety Tips
Ensure that operators have the necessary safety knowledge and operational skills.
Regularly inspect the vehicle's hydraulic system, brake system, and other critical components.
Be aware of your surroundings and avoid collisions or accidents
The inspection of the manual stacker minimizes wear and tear and requires special attention to the wheels, axles, forks, lifting and lowering operations. At the end of each job, the forks should be unloaded and lowered to the lowest position.
Therefore, the damage to the manual stacker will be relatively large; The operator must be familiar with the condition of the vehicle before use, and shall not let unlicensed personnel operate it at will; The vehicle cannot accelerate to start for a long time; Slow down before driving, slow down for a few seconds and then accelerate; When the vehicle is advancing, do not mistake the Forward and Backward directional buttons for the turn buttons.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
