How to quickly repair according to failure of the manual pallet truck suppliers?
The manual pallet jack manufacturers is a low lift and is limited to handling palletized cargo handling tools. Also known as the pallet truck suppliers, it has the characteristics of stable lifting, light handling, safety and reliability. However, manual pallet jack manufacturers will also have various faults due to frequent use. Next, let New Newton introduce you to the common faults and elimination methods of manual pallet truck suppliers.
Possible failures and elimination methods
First, insufficient lift
Cause analysis: manual pallet jack manufacturers insufficient hydraulic oil
Elimination method: add appropriate filtered working oil
Second, the return trip is not in place
Analysis of the reasons: 1. Manual pallet truck suppliers hydraulic oil filling too much
2. The manual pallet jack manufacturers deformation of the rotating part is stuck
3. The manual pallet truck suppliers plunger and the guide rod are stuck
Elimination method: 1. Take away the appropriate working oil
2. Replacement parts
Third, the fork does not fall after rising
Reason analysis: 1. Manual pallet jack manufacturers unloading device is abnormal
2. Manual pallet truck suppliers part deformation damage
Elimination method: 1. Re-adjust the unloading device
2. Replace the damaged parts
Fourth, Manual pallet jack manufacturers hydraulic oil leakage
Analysis of the reasons: 1. Manual pallet truck suppliers oil seal failure
2. The surface of manual pallet jack manufacturers is slightly damaged or worn
3. The manual pallet truck suppliers connection is loose
Elimination method: 1. Replace the oil seal
2. Replace damaged parts
3. Retighten the loose area
Five, the fork does not rise
Reason analysis: 1. The manual pallet jack manufacturers working oil viscosity is too large, or the working oil is not injected.
2. There are impurities in the manual pallet truck suppliers oil
3. Manual pallet jack manufacturers unloading device is abnormal
Elimination method: 1. Replace the working oil
2. Remove impurities from the oil circuit and update the working oil
3. Re-adjust the unloading device
Sixth, When the handle is shaken, the fork rises and then falls immediately. The handle has a large rebound phenomenon, or on the fork after the rise, there is a more obvious decline.
Cause analysis: the manual pallet truck suppliers valve is stuck by debris
Elimination method: open the valve, take out and clean the parts and replace them.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
