What are the precautions for operating the reach lift truck?
The reach lift truck is a kind of industrial transport vehicle that combines the advantages of balanced weight electric forklift and stacker truck. The reach lift truck of the electric forklift manufacturer has many comfortable and safe designs: the legless design makes the goods on the fork rack move without obstacles; With forward and backward tilt function, the use is more user-friendly; The mast can be moved forward and pushed backward, which is convenient and practical; The design of moving forward and pushing backward uses the joystick, which makes the use more experienced. Although there are many intelligent designs, many problems should be paid attention to when operating the reach lift truck.
As the steering system of the reach lift truck is fully hydraulic steering, if the oil pump motor does not work, the forklift will be difficult to steer, and the oil pump motor must be started to achieve easy steering. In the process of driving the reach lift truck, try to avoid long time and long distance acceleration. If you need to accelerate continuously in a place with good road conditions, just wait until the vehicle starts and the speed increases, and then hold the accelerator pedal. If the forklift needs to slow down, loosen the accelerator pedal and gently step on the brake pedal. The reach lift truck of the electric forklift manufacturer has the regenerative braking function, which can recover and convert the kinetic energy during deceleration. When going down the ramp, the circuit of the driving motor cannot be disconnected. You should step on the brake pedal gently and use the kinetic energy of the vehicle to go down, which can greatly save the electric energy of the battery.
The battery is an important part of the reach lift truck. Always pay attention to the condition of the battery and pay attention to maintenance. Do not over discharge and over charge, and charge in time. If it is stored for a long time, it should also be charged regularly. Always check the liquid level of the battery of the electric forklift, and do not let it fall below the standard line. If the liquid level is too low, add distilled water in time. Do not pour drinking water into the battery, otherwise too many impurities will be mixed into the battery, which will increase the concentration of electrolyte and shorten the battery life. The electric forklift manufacturer reminded that the battery should not only be paid more attention in normal use, but also be inspected and maintained regularly.
The reach lift truck is intelligent, convenient and safe, which is favored in production activities. However, there are also many precautions when operating the reach lift truck. The driver must remember that when driving a reach lift truck, do not overload, and safety is the first. The electric forklift manufacturer also reminds that attention should be paid to the inspection and maintenance of the reach lift truck at ordinary times, so as to extend the service life of the electric forklift, reduce costs and increase efficiency.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
