How to deal with the lifting problems of self loading pallet stacker?

The lifting problems of the self loading pallet stacker are generally related to the hydraulic system. The electric stacker manufacturer generally asks several questions when consulting with enterprises and drivers: Does the fork drop too slowly after the load is lifted or does this happen after the no-load lift? Is there any abnormal noise during fork lowering? What other abnormalities do you find when you slowly descend after lifting? Is the battery charged enough? When did you buy the battery? Is the distribution box of the self loading pallet stacker damaged?

The self loading pallet stacker is weak when lifting, slow when lowering, and makes noise, which may be caused by the cylinder seal problem. The driver needs to check whether the oil cylinder leaks oil, whether the seal is intact, whether the pressure relief device is intact, and whether the hydraulic oil is sufficient. If there is no problem, the electric stacker manufacturer thinks it may be the lifting motor of the self loading pallet stacker, which needs to be repaired and replaced in time.

The electric stacker manufacturer told the driver to check whether there were load problems and overweight. If the self loading pallet stacker is equipped with weight and height limiting devices, the fork cannot be lifted when overloaded. If the safety device is triggered during the lifting process, the fuse in the distribution box will automatically open. If the fuse of the self loading pallet stacker is disconnected, the fuse can be reconnected or replaced after reducing the load. Therefore, be careful not to overload.

Finally, check whether the battery plug of the self loading pallet stacker is loose. If it is loose, tighten it. Check whether the plug at the connection is damaged and whether it needs to be repaired or replaced. The electric stacker manufacturer told us that we should also check whether the battery of the self loading pallet stacker is damaged, whether there is liquid overflow, and whether there is obvious damage on the battery surface. If there is a problem with the battery, there will be many problems with the self loading pallet stacker, so it must be checked and repaired in time.