How to charge a semi electric stacker suppliers battery?
The electric stacker manufacturers is an artificial push-pull walk that electrically lifts and lowers. The semi electric stacker suppliers is suitable for short-distance transportation in factories, warehouses, logistics and other enterprises, and for loading and unloading in areas where workload is small. The maintenance of the electric stacker manufacturers is relatively simple. The maintenance of the battery in the key components is the most important. How to charge the battery of the semi electric stacker suppliers? We understand from the following points.
1. The charging environment of the electric stacker manufacturers is mainly clean and ventilated. When conditions permit, the battery can be taken out or the cover of the semi electric stacker suppliers can be opened;
2. The electrolyte level of the electric stacker manufacturers should be 15mm higher than the partition. Below this scale line, the electrolyte should be added in time to prevent the battery from losing electricity and affect the battery life of the semi electric stacker suppliers. The temperature of the electrolyte shall not exceed 45 degrees during charging;
3. It is not possible to expose the open flame when charging the electric stacker manufacturers. Because the battery will generate a lot of flammable gas during the charging process, the semi electric stacker suppliers will prevent fire during charging.
4. Electric stacker manufacturers should avoid skin and acid contact during charging. If there is contact, use plenty of soapy water or consult a doctor.
5. The battery should be kept clean and dry in peacetime. It is not allowed to put other objects on the battery of the semi electric stacker suppliers;
6. The used batteries of the electric stacker manufacturers should be disposed of in accordance with the national environmental protection law.
The semi electric stacker suppliers can generally carry 2 tons of load, and the load weight is reduced with the load curve after more than 2 meters. After raising 2 meters, the load is 1-1.3 tons, and the increase to 3 meters can only load 800 kilograms. This is related to the load curve. The higher the height, the lower the load. A electric stacker manufacturers will have a “loss of load” when it is more than 2 meters.
The semi electric stacker suppliers has a load curve change diagram produced by the manufacturer, and the stack should be strictly in accordance with this graph. Don't be lucky: maybe, probably, maybe not! If it happens, then this damage will be fatal. Therefore, the purchase of electric stacker manufacturers must be based on the actual use of the situation! Then is to choose products that meet the safety standards, reliable after-sales business.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
