Precautions for the battery charging process of the small electric forklift
The small electric forklift battery cannot be completely discharged, and should be charged until the charger returns the charging completion signal. In fact, there are still a lot of precautions related to the charging of forklift batteries. Next, learn about the relevant content with forklift manufacturers in china. So that we can avoid stepping on thunder when charging the device in the future.
Generally, the connection between the charger and the power supply is usually about 14-16 hours. After charging, the voltage of each single battery is about 2.7V, and the electrolyte density of each single battery will reach 1.27-1.29kg/1.25℃. Here forklift manufacturers in china suggest that everyone who has used a small electric forklift should charge it in time, and do not place the equipment for a long time. It is necessary to charge and maintain the equipment after a short period of time. Here are some things to keep in mind while charging:
Invisible batteries should be connected to an open flame, so as to prevent the gas from causing an explosion, causing a fire, and causing unnecessary economic losses and personal injury.
When charging, it should be in a well-ventilated environment. Forklift manufacturers in china suggest to lift the cover of the small electric forklift, or take the battery out of the forklift.
Temporary wiring is not allowed.
Make sure that the insulator tightly wraps the charging cable to ensure the personal safety of the operator.
The surface of the small electric forklift battery should be kept clean, and the surface of the battery should be wiped with an antistatic cloth.
Do not place tools or other metal objects on the battery.
During charging, the temperature of the electrolyte should not be higher than 45°C.
After the small electric forklift of forklift manufacturers in china is charged, the electrolyte level should be checked to see if it is 15mm higher than the separator. In general, distilled water should be replenished once a week.
Avoid contact with the skin and acid. If it comes into contact with the skin, rinse with plenty of soapy water, or seek medical attention in time.
Used batteries should be disposed of according to local regulations.
Forklift manufacturers in china would like to talk about the conversion of small electric forklift batteries. We need to start from the following four aspects:
1) Remove the battery solid screw
2) Remove the cables from the battery terminals.
3) Slide out or hang out the battery.
4) Install the small electric forklift battery according to the reverse process indicated below, tighten and connect correctly.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
