What are the precautions for charging the battery of a semi-electric stacker?
The battery of a semi electric stacker truck cannot be discharged completely, and should be charged until the charger receives the charge completion signal. In fact, there are many precautions for charging the battery of a semi electric stacker truck . Next, let's learn about the relevant content together. So that we can avoid stepping on thunder when charging the device in the future.
Generally, the connection between the charger and the power supply is usually about 14-16 hours. After charging, the voltage of each large cell battery is about 2.7V, and the electrolyte density of each cell battery will reach 1.27～1.29kg/1.25℃. Here, we recommend that you charge the electric stacker in time after using the semi-electric stacker, and do not leave the equipment for a long time. The equipment should be charged and maintained after a short period of time. The following are the things you should
keep in mind during the charging process:
It is invisible that the battery is connected to the open flame, so as to prevent the gas from causing an explosion, causing a fire, and bringing unnecessary economic losses and personal injuries. When charging, it should be in a well-ventilated environment. We recommend opening the upper cover of the semi electric stacker truck or removing the battery from the forklift. Temporary wiring is not allowed. Ensure that the insulator firmly wraps the charging cable to ensure the personal safety of the operator. The surface of the battery of the semi-electric stacker should be kept clean. Use an antistatic rag to wipe the surface of the battery. Do not place tools or other metal objects on the battery. When charging, the temperature of the electrolyte cannot be higher than 45°C. After charging the semi-electric stacker, check the electrolyte level to see if it is 15mm higher than the partition. Normally, add distilled water once a week. Avoid contact between the skin and acid. If it touches the skin, wash it with plenty of soap and water, or seek medical attention in time. Waste batteries should be disposed of according to local regulations.
We have to talk about the issue of battery conversion for semi-electric stackers. We need to start from the following four aspects:
1) Remove the battery solid screws
2) Remove the cable from the battery terminal.
3) Slide out or hang out the battery.
4) Install the battery of the semi electric stacker truck according to the reverse process indicated below, and tighten and connect correctly.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
