What causes the tire wear of 1 ton electric forklift?
As we all know, tires are an important part of a 1 ton electric forklift. Good tires can help the electric forklift carry more goods, make the electric forklift travel faster and more stable, and provide guarantee for the safe driving and efficient work of the electric forklift. However, the tires of electric forklift also have service life, and the specific time shall be determined according to the wear degree of the forklift tires. If the driver does not care about the wear of the tires of the electric forklift, it may cause the tire to burst in serious cases, which will have a bad impact on the normal operation. Then, what are the reasons for the serious wear of the tires of a 1 ton forklift truck? Electric forklift manufacturer will answer.
First of all, the cause of serious tire wear of 1 ton electric forklift is road conditions, which will affect the friction between the tire and the ground and the load that the tire can bear. If the working environment of the forklift is complex, the life of the tire may be greatly reduced. Secondly, load and tire pressure will also affect tire wear. Under a certain load and tire pressure, the vehicle speed increases, the deformation frequency of the tire, the vibration strength of the carcass, and the distortion deformation around the tire and in the lateral direction will also increase, the heat generated by friction per unit time will increase, and the working performance of the tire will decrease. Electric forklift manufacturer suggests that this may lead to ply fracture and tread peeling, which will aggravate tire wear.
The corrosion of grease and acidic substances will also cause serious wear of the tires of 1 ton electric forklift. When the tire is corroded by grease and acid substances, the physical and chemical properties of the tire will change, and the bearing capacity will be greatly reduced. If the effect of high temperature is added, the damage to the tire will be more serious, and it is very easy to cause tire burst. In addition, the tire corroded by grease will have massive peeling off of the sealing layer, rubber peeling off at the tire mouth and separation of the carcass cord from the rubber. The electric forklift manufacturer reminds that since the patch cannot fit with the oil-containing rubber, it is unlikely to repair the tire even if the damage is small.
Therefore, when using a 1 ton electric forklift, it is necessary to pay attention to the wear of tires at all times. If serious wear is observed, it is necessary to find out the cause in time and stop the loss in time. In addition, pay attention to the maintenance and repair of the tires after using the forklift, so as to prolong the service life of the tires. The electric forklift manufacturer tells the driver that the tire is very important for the electric forklift. Extending the life of the tire can not only save the cost, but also improve the work efficiency and quality.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
