What to do if the lifting system of the 3 ton electric forklift fails?
The 3 ton electric forklift is gradually replacing the internal combustion forklift due to its flexibility, convenience, low noise, pollution-free and large load capacity. It is widely used in food, medical, light textile and other industries. As we all know, the main function of the electric forklift is to transport and load and unload goods. Both functions depend on the lifting system of the electric forklift. If the lifting system goes wrong, it will affect the working efficiency of the whole forklift, and then damage the economic benefits of the enterprise. Then, what problems are easy to occur in the lifting system of 3 ton electric forklift, and how to solve these problems? The electric forklift manufacturer has something to say.
If the lifting speed of the 3 ton electric forklift is too slow or cannot be lifted, the reasons may be as follows: oil tank is short of oil, oil filter is blocked, overflow valve pressure is insufficient, hydraulic oil temperature is too high, hydraulic oil is too thin, and hydraulic pipeline leaks oil. At this time, it is necessary to conduct troubleshooting and maintenance one by one. The electric forklift manufacturer suggests that the oil tank needs to be replenished or replaced in time due to lack of oil, the oil filter needs to be cleaned due to blockage, the overflow valve needs to be readjusted due to insufficient pressure, the hydraulic oil temperature is too high or the hydraulic oil is too thin, and the hydraulic pipeline needs to be replaced directly due to oil leakage.
If the gantry of the 3 ton electric forklift jumps during lifting, it may be because there is air in the lifting hydraulic cylinder, the gear pump has poor performance, the oil is not clean, and the steering valve of the electric forklift is not flexible. How to conduct troubleshooting and maintenance in this case? You can first loosen the air release screw on the lifting hydraulic cylinder to discharge the air in the lifting cylinder, and then check whether the oil is clean. If not, replace it as soon as possible. The electric forklift manufacturer reminds that if the problem still exists, the steering valve and gear pump should be checked. In case of poor operation, it needs to be repaired or replaced in time.
The lifting system is very important for the 3 ton electric forklift. The good operation of the lifting system will greatly improve the working efficiency of the electric forklift. If there is a problem with the lifting system, there is no need to worry. Conduct troubleshooting one by one to find the root cause of the problem and then prescribe the right medicine. The electric forklift can be restored to normal operation soon. The electric forklift manufacturer recommends that the lifting system be regularly maintained to reduce the probability of problems and ensure normal daily work.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
