What should be paid attention to in the use of self loading pallet stacker ?

　　Theelectric stacker is not a manual stacker, and its structure is complicated. There are many problems we need to pay attention to in the process of use. Although the stacker truck at Jiangsu electric fork station is not a special electric vehicle, it does not need a driver's license to operate, but the car is licensed. Operation is just a little training just fine. People who are familiar with time can simply load, unload and stack goods in a few rounds.

　　 But the operation of Jiangsu electric forklift must pay attention to safety. What problems should be paid attention to in the operation of self loading pallet stackers?

　　1. When the self loading pallet stacker is not in use, pay attention to the anti-rust maintenance of the fork and other parts, and clean the surface and related parts before parking. Also turn off the power. And check the power from time to time and charge it regularly.

　　2. Maintain the standard driving state of the electric stacker stacker. When the fork is off the ground, the fork is 10-20 cm from the ground. When the self loading pallet stacker stops, the fork will drop to the ground; when working under bad road conditions, its weight should be appropriately reduced to reduce the driving speed of the self loading pallet stacker.　

　　3. Operators of self loading pallet stacker trucks are not allowed to drink, overweight, or drive at excessive speeds. Sudden braking and sharp turns are strictly prohibited. Do not allowelectric stackers to enter places where solvents and flammable gases are stored.

　　4. When the electric stacker is running, if the electric controller is out of control, disconnect the main power supply in time.

        5. During the operation of the electric stacker, do not frequently use emergency braking when driving at high speed; otherwise, huge friction will be generated on the brake assembly and drive wheels of theelectric stacker, which will shorten the service life of the brake assembly and drive wheels and may even be possible Damaged the brake components and driving wheels of Jiangsu electric forklift.

　　6. ??Special attention should be paid to timely charging and correct maintenance of the battery during the use of the electric stacker. Of course, it is not necessary to frequently charge the battery without full use. This will damage the battery.

　　7. Unlike manual stackers, self loading pallet stackers have simple structure, simple operation, and there are only a few safety precautions. The safety equipment of Jiangsu electric forklifts must be complete and intact, with sensitive and effective components, and good technical performance. It is strictly forbidden to drive anelectric stacker with illness. In general,electric stackers must be maintained regularly and all components must be carefully inspected.

       8. During the operation of theelectric stacker, it is inevitable to speed up and brake suddenly. Doing so will damage the motor and battery. When the Jiangsu electric forklift starts up and speeds up, it stably accelerates the handle. If the road conditions are good, the self loading pallet stacker will continue to accelerate. When the self loading pallet stacker needs to decelerate, Panasonic accelerate the handle and press the operating handle to make full use of the deceleration energy. If the self loading pallet stacker has a regenerative braking function, it can recover the kinetic energy during deceleration. When the self loading pallet stacker is going downhill, do not disconnect the self loading pallet stacker's drive motor circuit, press the operating handle to make the self loading pallet stacker use in the regenerative braking state, use the kinetic energy of the self loading pallet stacker to decrease, and reduce the energy consumption of the battery.