What should the electric hydraulic forklift do before driving?
Many friends have had this kind of problem: the electric hydraulic forklift just started to work, and this or that kind of problem appeared soon, but they haven't had time to do any complicated work, nor any non-standard operation behavior. The electric forklift manufacturer told us that this was not caused by our work for a short period of time, but an existing problem. The reason why we found that the work efficiency was delayed after we put into work is that we did not check and prepare before work. Now, the electric forklift manufacturer will tell you what electric hydraulic forklift needs to do before driving.
Before driving the electric hydraulic forklift, we need to check the height and density of the battery electrolyte. Under normal conditions, the liquid level should be 10-15mm higher than the partition. The density of electrolyte shall meet the requirements of local time zone and season. The single cell voltage of the battery shall not be lower than 1.75V, and the voltage of the whole vehicle shall not be lower than the minimum limit voltage. For example, the voltage of 0.4t electric forklift and 0.5t electric forklift of the electric forklift manufacturer is 20V, and the voltage of 2t electric forklift is 35V. If the requirements are not met, electrolyte shall be supplemented. The electric forklift manufacturer reminds that the electricity must be sufficient before working, and the electrode connector must be clean and fastened.
Before driving the electric hydraulic forklift, check the power circuit. All power lines should be firmly connected and in good contact. The fuses should also be in good condition. All switches and handles should be placed at the specified positions. Check whether the instrument, lighting equipment and horn work normally. Also check whether the steering system and braking system are flexible, and whether the bearings and relevant running parts can operate well. Check the electric hydraulic forklift for oil leakage. Check whether the fork, lifting chain and mast can operate smoothly. The electric forklift manufacturer reminds us that we must check whether the electric forklift has faults and eliminate hidden dangers in time.
The above is what should be done before driving an electric hydraulic forklift. No matter what type of electric forklift, systematic inspection shall be carried out before operation to ensure that all parts can operate normally. The electric forklift manufacturer believes that this can not only ensure the work efficiency, but also ensure the safe operation of drivers, killing two birds with one stone.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
