How to maintain the battery of electric pallet jack?
Nowadays, electric pallet jack is used more and more widely. In the transportation work, enterprises attach importance to the control of work efficiency and cost, and the use of electric pallet jacks can effectively solve these two problems at the same time. Moreover, the electric pallet jack also adapts to the trend of environmental protection. It does not produce pollutants, and has low noise, which is good for people's physical and mental health. However, many people are not familiar with the common sense related to the maintenance of electric pallet jacks, so the electric pallet jack manufacturer first came to popularize the method of maintaining the battery, an important component of electric pallet jacks.
To be sure, people's maintenance work on the battery of electric pallet jack is a short board, which is easy to be ignored or improperly maintained. The electric pallet jack manufacturer tells us that good maintenance will prolong the service life of the equipment. It can be compared that under the condition of paying attention to maintenance or neglecting maintenance, which electric pallet jack of the same model and purchased at the same time will fail? The answer is clear at a glance. The electric pallet jack manufacturer thinks that enterprises should understand that it costs a lot to repair and replace batteries. If it can be avoided, why waste money?
Before charging the battery of the electric pallet jack, check whether the battery temperature is lower than 30 ℃ and whether the electrolyte level is lower than the partition. The electric pallet jack manufacturer suggested that the wires should be checked for normal use. We need to plug the battery charger plug into the socket, and then open the charging device for inspection.
The temperature of the battery of the electric pallet jack shall not exceed 45 ℃ during charging. If the battery temperature exceeds this range, please stop charging and recharge the battery at a lower current after it cools down to ensure safe use of electricity. After 14~16 hours of charging, the electrolyte density of the battery can reach 1.27~1.29kg/1.25 ℃, and the voltage is 2.7V. The electric pallet jack manufacturer suggests that you should charge and maintain the electric pallet jack in time after using it.
After the battery of the electric pallet jack is charged, the charging current of the charger is disconnected, and the "STOP" indicator light is on. At this time, turn off the switch and pull out the charger to avoid accidents and unnecessary losses. This is not a problem if you buy a pallet jack produced by the electric pallet jack manufacturer. The electric pallet jack of the electric pallet jack manufacturer is equipped with a full intelligent fast charger, which does not require personnel supervision. The intelligent electric quantity display instrument monitors the voltage in real time, so as to quickly understand the output voltage and the amount of electricity stored.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
