How to protect small electric forklifts from oil leakage?
Small electric forklifts have oil leakage, and the reasons are complicated. Here are a few reasons: installation problems; material problems; seals aging; vibration, corrosion, pressure difference, improper use and maintenance of pipelines.
How do I know the specific reason? First, check the oil leakage location. Oil leakage at the pipe joints may be improper installation and need to be tightened. Or check the oil cylinder for leaks caused by quality problems such as cracks. In addition, check whether the piston rod of the cylinder is worn or not, and whether it has burrs. Whether it is overused, small electric forklifts work for a long time, and the pressure caused by overuse will cause oil leakage.
There will also be oil leakage at the interface where the seal is aging and damaged, and the seal must be replaced. In fact, more than 80% of the oil leakage may be caused by the aging of the seals. If the small electric forklift with aging seals is used for more than three years, the plasticizer of the seals loses its elasticity, and some serious even cracks. . Of course, in general, we will not find the seal cracks when we use the car. Frequent maintenance and inspection will find the problem early and replace the seal in time.
Warehouse forklift manufacturers remind you to do the maintenance of small electric forklifts to effectively avoid oil leakage, and the hydraulic oil should be replaced regularly. To replace the hydraulic oil is to drain the hydraulic oil in the oil pump, take out the oil filter, clean it, and compress it. Clean the air, install it back in place, and connect the pipeline. The hydraulic oil must be new, otherwise the old hydraulic oil will cause the lifting parts of the hydraulic system to wear. After changing the hydraulic oil, you must carefully check whether the pipeline is damaged and the joints are tightly connected. Remember that the components must not be damaged and the connection joints must be tight.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
