What should I pay attention to when using an electric forklift for thefirsttime?

The most basic inspections of newly purchased small electric forklifts should be done when they are used for the first time:
1. Check whether the instrument of the small electric forklift is normal?
2. Check whether the control handle can be used normally, and operate each handle manually.
3. Check whether the battery power is sufficient. Generally, the battery of the warehouse forklift manufacturer is fully charged before leaving the factory, and it can be used when the goods arrive. However, it does not rule out the delay of the delivery date, or the force majeure encountered during the transportation process extends the transportation time, resulting in the consumption of electricity.
4. Check whether the tire pressure of the small electric forklift is normal, especially if the pressure is too high in summer, it is easy to puncture.
5. Check the interface of each component and whether the power supply connector is properly connected.

6. Check whether the fasteners are firm.
7. Check whether the safety signal indicator, forklift horn, etc. are normal.
8. Check whether the small electric forklift has oil leakage and whether the battery fluid is at the normal water level.
9. Start the electric storage forklift to see if all functions are operating normally. Lifting of forks, tilting forward and backward of mast, etc.
10. Cargo operation test (remember to go back and forth), carry out the cargo lifting test according to the load ratio data given by the warehouse forklift manufacturer, do a forward and backward tilt test for the forklift, remember not to move the vehicle when the forklift is lifting . The correct steps for loading and unloading are: lift the forklift slightly until the pallet is off the ground, drive the forklift to a fixed position, lift the fork to a fixed position, unload, the fork exits the pallet, lower the fork, and start the forklift.

After the basic inspection is done, it can be used after everything is normal. There are also things to pay attention to during the use:
1. In general, large-scale enterprise warehouses will plan dedicated routes for electric forklifts. For safety reasons, operators should abide by the rules and drive along the routes.
2. Pay attention to pedestrians during driving, and warn in advance if you encounter pedestrians.
3. When using a small electric forklift for the first time, pay attention to slowing down and keeping the distance between the two shelves.
4. When the electric forklift is loading goods, remember to avoid other people near the vehicle. When raising the goods, pay attention to the height of the mast, and do not hit the ceiling of the warehouse.
5. When loading goods, the goods should be placed properly and not offset.
The above content is shared by electric forklift manufacturers, and I hope it can be helpful to you. If you have any other questions, please call for consultation.